Flow Switches & Sensors

FS-480 Series Flow Switch

Part Number: 204718
FS-380S_239692
Image is of similar product

PRODUCT DESCRIPTION:

 

FS-480 Series Flow Switch is a large-body inline flow switch that delivers ample flow rates with minimal pressure drop an is ideal for processes that push more fluid through their systems and demand low pressure drops. The FS-480 is ideal for semiconductor, critical medical equipment applications and high-pressure lubrication and cooling systems.

LEAD TIME:

5 days
Lead-times and expedites

Lead-times apply to standard parts & configurations. Expedited shipments available by contacting factory. Lead-times may vary based on quantity and/or non-standard configurations.

CE ROHS Gems Compliant CSA

Features

  • Flow Rate Settings: 0.50 GPM to 3.00 GPM
  • Port Size: 1/2" NPT; 3/4" NPT; 1/2" Tube Compression Fitting
  • Primary Construction Material: 316 Stainless Steel
  • Setting Type: Fixed
Sku
204718
Sensor Type
Piston Type
Model
FS-480
Primary Material Of Construction
Alloy
Body Material
316 Stainless Steel
Wetted Materials
316 Stainless Steel, PPS, Epoxy, Fluorocarbon
Minimum Pressure
Over 500 psi
Maximum Pressure
1,000 psi
Minimum Temperature
-20°F
Maximum Temperature
250°F
Flow Setting
2 GPM
Flow Setting Range
1.01-5.0 GPM
Adjustable Range
N/A
Set Point Accuracy
±20%
Set Point Differential
20%
Switch Type
SPST, N.O. (20 VA)
Port Size
3/4" NPT Male
Electrical Termination
24" Long, 22 AWG, PVC Cable
Recommended Filtration
100 micron
Approvals
UL Recognized
Weight
0.375

Reed Switch Protection

Format .pdf
Size 56 KB

Gems Sensors Instructions, FS-480

Format .pdf
Size 62 KB

Gems Sensors Catalog, FS-480

Format .pdf
Size 2 MB
  • General Industry
  • General Industry - Electronic Engine Control System
  • General Industry - Other
  • General Industry - Test & Measurement
  • Medical - Analytical Instruments
  • Medical - Cooling
  • Medical - Other
  • Medical Equipment
  • Process Applications
  • Process Industry - Other
  • Semicon Equipment
  • Semiconductor - Other
  • Semiconductor - Semiconductor Equipment
  • Semiconductor- Cooling
Can a flow switch handle more flow than the flow set point?

A flow switch can typically handle a greater flow rate than its flow setting. Many flow switches are set 4 times less than the actual operating flow rate. As flow rate increases, pressure drop also increases, eventually causing a restriction of flow.

Can a flow switch be mounted at an angle?

Yes, piston and shuttle type switches utilizes a small, strong spring, that is not bothered by the mounting attitude of the flow switch and will perform at any orientation. The exception is our FS-400P, which is spring less.

Can a flow switch be cleaned?

Yes. The design facilitates cleaning by flushing out the flow switch with clean water. Some flow switches have removable parts for a more thorough cleaning.

If I add a small diameter connector to my flow switch, will it affect the pressure drop?

The pressure drop across the flow switch will not increase but you could see a pressure drop across the connector itself. Every flow fitting has a pressure drop associated with it.

Why is filtration necessary?

Filtration helps prevent clogging from solid particles. It is recommended but many applications do not use them. Certain flow switches are more susceptible to particles than others. A general rule to follow is the lower the set point the more susceptible to particles the unit becomes.

What is the difference between a flow switch and a flow sensor?

A flow switch detects the presence of the flow at a predetermined set point. A flow sensor is used for monitoring flow rate, telling the user the flow rate (i.e. 5 GPM).

Can flow switches be used for liquid or gas?

Yes, Gems has flow switches for liquid and gas applications. A flow switch intended for liquid flow should not be used on gas flow.

Can flow rate monitors be used for liquid or gas?

Gems flow sensors are limited to liquid flow rates. There are flow sensors available for gas measurement from other manufacturers.

Are flow switches set on the rise or the fall?

Typically, catalog units are set on the rise. Rising set points are most commonly used in coolant loops to insure proper flow. Switches can be calibrated on the fall when required.

What does SPST or SPDT switch mean?

SPST (single pole single throw) switch comes wired only one way, either normally open or normally closed. This is the best choice for OEM applications. It insures that it can only be wired one way. SPDT (single pole double throw) switch comes wired for both normally open and normally closed. Customers like this option when prototyping and unsure of the end requirement.

What is the minimum pressure needed to operate a flow switch?

Gems will list minimum pressure requirement, this is a very conservative specification, one that is application specific. If you have been using a unit below specification without issue, it is fine to continue its use. If you have flow through the unit then you have overcome all pressure drops in your system, including the flow switches.

Does viscosity make a difference?

Yes, as viscosity increases the set points come down. Check the specifications for your flow switch for recommended maximum viscosity.