Series 26 Low-Water Cutoff Open Board

Buy Series 26 Warrick Low Water Cutoff Open Board at Gems Sensors
  • Non-Powered Contacts 
  • Time Delays Available 
  • LED Monitoring 
  • Snap-Thru Standoff Mounting 
  • Power Outage Feature 
  • Meets CSD1 Requirements
  • U.L. "Limit Control"

Designed for boiler low-water cutoff protection. A snap-through standoff mounting device is available for the Series 26. Optional Power Outage feature resets after nuisance outages.  The optional reset button is used when the device has been deactivated because of low-water condition. Reset is functional only if water has returned to normal level. Built-in 3 second time delay is standard. Up to 90 seconds available for increasing and decreasing levels.

Optional Dirty Electrode Detection



  • Low-Water Cutoff 
  • Point Level 
  • Valve Control 
  • Alarms 
  • Pump Control