Transmitter/Multipoint Switching Combo
Quick Specs...
- 49-inch (1.25m) range. Compact sensor with 2" dead band and beam width are optimized for small tank applications
- 1" NPT mounting
- Reliable, non-contact alternative to float and conductivity level sensors for corrosive, sticky or dirty media
- Outputs continuous level and provides full pump or valve control
- PVDF transducer for corrosive liquid media
|
|
|
Overview / Design Principle:
The UCL-510 offers an innovative, non-contact ultrasonic level sensor with no moving parts built for challenging fluid measurement. This accurate and reliable sensor is built for general purpose, small tank applications 49.2" (1.25m) or less and offers switch, controller and transmitter capabilities in one multi-function transmitter. The UCL-510 is suited for corrosive and dirty applications and is virtually maintenance free and reduces tank system hardware. The UCL-510 combines 4 relays, 4-20mA output and pump/valve control in one small sensor. The UCL-510 offers a total solution for fluid handling and automation.
Applications:
Water and Waste Water Control Automation Chemical Feed Food and Beverage Acids, Inks, Paints Slurries
|
|
| Specifications: |
Range
|
49.2" (1.25 m)
|
Accuracy
|
0.125" (3 mm)
|
Resolution
|
0.019" (0.5 mm)
|
Beam Width
|
2" (5 cm)
|
Dead Band
|
2" (5 cm)
|
Supply Voltage
|
24 VDC (loop)
|
Loop Resistance
|
400 Ohm max.
|
Consumption
|
0.5W
|
Signal Output
|
4-20 mA, two-wire (when loop powered)
|
Contact Type
|
(4) SPST relays 1A
|
Loop Fail-Safety
|
4 mA, 20 mA, 21 mA, 22 mA or hold last
|
Relay Fail-Safety
|
Power loss: Hold last; Power on: Open, close or hold last
|
Hysteresis
|
Selectable
|
Configuration
|
USB 2.0
|
Temperature Compensation
|
Automatic over range
|
| Process Temperature |
20°F to 140°F (-7°C to +60°C) |
| Ambient Temperature |
-31°F to +140°F (-35°C to +60°C) |
| Pressure |
MWP = 30 PSI |
| Enclosure |
Type 6P encapsulated, corrosion resistant & submersible |
| Enclosure Material |
PC/ABS FR |
| Strain Relief Material |
Santoprene® |
| Transducer Material |
PVDF |
| Cable Length |
48" (1.2 m) |
| Cable Jacket Material |
Polyurethane |
| Process Mount |
1" NPT (1" G) |
| Mounting Gasket |
Viton® |
| Classification |
General Purpose |
| Approvals |
CE, cFMus |
|
|
 |
| A |
48" (1.2 m) |
| B |
2.00" (51 mm) |
| C |
3.20" (81 mm) |
| D |
2.70" (69 mm) |
| E |
0.89" (23 mm) |
| F |
1" NPT (1" G) |
|
|
| |
|
|
|