DC Powered Control, Modular Plug-In Design
Quick Specs...
- Solid State Reliability
- DC Power Supply
- Low Maintenance
- Easy to Install and Replace
- Low Volt / Low Amp
- Circuitry Minimizes Probe Deterioration
- Protective Housing
|
|
|
Overview / Design Principle:
Model DC controls are designed for applications where only direct current power is available. DC units can be used as differential level controls or single point alarm contactors. Thanks to solid state reliability, plug-in convenience, and a choice of 12 or 24 VDC supply voltage, Warrick DC controls can be used with confidence in many applications.
Applications:
- Single and Differential Service
- Solar and Wind Powered Pumps
- Portable Cleaning Equipment
- Battery-Powered Level Control
- Well Pumps
- Remote Reservoirs
- Remote Irrigation
- Onboard Ship Level Control
|
|
| Specifications |
Contact Design
|
SPDT 1 N.O. & 1 N.C. (1 Form C), non-powered contacts
|
Contact Rating
|
5 A @ 30 VDC or 120 VAC Resistive 1/8 hp
|
Mode of Operation
|
Direct or Inverse, factory set
|
Sensitivity
|
0 - 1M Ohm maximum, factory set
|
Primary Voltage
|
12 VDC, 24 VDC, negative ground (±20%)
|
Supply Current
|
40 mA when relay energized, 10 mA w/relay de-energized
|
Secondary Voltage
|
12 VDC
|
Terminal Style
|
Screw connector
|
Temperature
|
-50°F to 150°F (-46°C to 65°C)
|
Options
|
Time Delay
|
|
|
 |
| A |
2-3/8" (6.03 cm) |
| B |
2-3/4" (6.99 cm) |
| C |
3-1/2" (8.89 cm) |
| D |
5/8" (1.59 cm) |
| E |
5/32" (.40 cm) |
| F |
2-5/16" (5.88 cm) |
| G |
1-5/32" (2.94 cm) |
| H |
11/64" (.44 cm) |
| I |
1-1/16" (4.29 cm) |
| J |
2" (5.08 cm) |
|
|
|
|
|